[boneym1960]

Re: Zanussi ZWD14581W1 fault code E9F

Cheers Dragen for advice on fault code,went out to it today and by component test and deduction put the fault down to a faulty motor inverter as its got a three phase induction motor on this model similar to those used on the higher end Merloni machines that suffer similar problems especially if suds lock/ overload on rinse/spin,I normally get these repaired or exchanged by E.M.W electronics. don’t know if they cover these LUX brands though, any idea of repairer/exchange or is it just new only….Regards….Dave (engineer)

[boneym1960]

Re: zanussi zdf601 k dishwasher

Thanks seamy,was hoping someone would come up with the techno on this one ,is there a simple fix,replacement triac etc, or is it a new p.c.b,doesen’t sound good to me….regards…..Dave

[boneym1960]

Thanks Iodom, ordered p.c.b. online today,let you know later if if did the fix……thanks….Dave

[boneym1960]

yeah, thanks for that info on heater fault code lights 2 and 4,i tested the heater about 25 ohms and safety thermostat o.k. (0 ohms)and no earth faults) guess you right and maybe suspect faulty p.c.b.,checked that tonight and no visible evidence of burning arround heater relay or tracks,was also thinking about a faulty flow meter not regestering water flow in and perhaps aborting on time-out,or am I now looking to deep?

[Author]

Posts