Forum Replies Created
-
AuthorPosts
-
bongle
ParticipantRe: Bosch exxcel 1400 express
now I would suggest you check the water inlet valve filter (remove cold hose to access) as the fine mesh may be silted up?
Hiya tried the above and everything was ok still no luck i have to keep adding extra water to the drawer so they dissolve! thanks anyway guys xbongle
ParticipantRe: Bosch exxcel 1400 express
OOO good job you said i wouldnt of turned it off, right im gonna go now and investigate………erm look to turn the water off first of course! thanks for your help x
bongle
ParticipantRe: Bosch exxcel 1400 express
Sorry i havnt got the booklet you see, ill have a look in a minute and im looking for mesh right?
bongle
ParticipantRe: Bosch exxcel 1400 express
To check that would i have to pull the machine fully out or not?
bongle
ParticipantRe: Bosch exxcel 1400 express
Ok heres the number from the door……….
WFX2867GB/01 FD8404 600228Hope this is the right one? thanks x
bongle
ParticipantRe: Bosch exxcel 1400 express
The dispenser jets arn’t clogged as with mine you can take the jet plate off and clean it and its spotless! ive scrubbed it with a tothbrush and cottonbuds. I dont know the model number where would i find this? i havnt got the instruction book either sorry i threw it.
bongle
ParticipantRe: Bosch exxcel 1400 express
Ive used to ariel ones and they are still all stuck in the drawer!!!! gr this is driving me mad, thanks anyway guys x
bongle
ParticipantRe: Bosch exxcel 1400 express
No it hasnt got a hot water connected to it dont know why…….but anyway ill go and get some new tablets now and see if they work thanks for all your help as well x
bongle
ParticipantRe: Bosch exxcel 1400 express
Mine fills with cold water first not hot? is this correct
bongle
ParticipantRe: Bosch exxcel 1400 express
Yes ive changed the tablets 3 times now and it still happens, i have just cleaned it again with buds and a old toothbrush, i did notice that the top part does pull away and click back into place so thats been cleaned as well now!
I looked when the draw was out and the water is going through all the holes perfectly so i dont know what to do other than use the tablets you put in the drum?I am putting them in the correct part arnt i? ive got 3 section to the draw, i use the first for tablets-middle for softner- whats the other one for?
thanks in advance x 🙄 -
AuthorPosts
