Forum Replies Created
-
Posts
-
Re: whirlpool adp 4501/5 – 6 flashes
penguin,
YOU ARE A STAR 😀
Its all working, the appliance has sat in my kitchen unused for over 9 months now,(we didn’t know about this site and couldn’t afford an engineer visit!) and with your advice we fixed it in under 10 minutes!!
I hope the washing machine heating element will be as straightforward!
If ever you are in Norfolk – please let us by you a drink or 3!
BP
Re: whirlpool adp 4501/5 – 6 flashes
Hello again,
THANK you so far….
We have located the pump the attached electronic Heat sink was very warm, when removing the unit it was clean BUT a large flat stone – was in between the propeller blades – it measures approx 15mm by 20mm by 3mm thick! How did that get in there??
So we have removed it and are trying it again – will let you know (keep your fingers crossed!!)
Thanks
Re: whirlpool adp 4501/5 – 6 flashes
hi there,
it was 6 flashing lights but that was beacuse it wasn’t plumbed in – so we plumbed in back in and now its 4 flashing lights, but it is full of water, and doesn’t appear to have drained any water away.
Sorry to have explained it badly 😳
Shall I still check the black grill mentioned in your previous reply?
Sorry to be a pain
BP
Re: whirlpool adp 4501/5 – 6 flashes
hi – yes me again….
now plugged in (haven’t used for 6 months due to fault so had unplugged it!) but same as original problem – 4 flashes and the water has not drained away
hope this is a bit more helpful…
Re: hotpoint wt540 – help just keeps washing!!
Thank you, element ordered will let you know how I get on!
BP 😆
Re: hotpoint wt540 – help just keeps washing!!
hello Penguin,
Thanks – when you say one bolt, do I have t take the back off the washing machine, and will I see the element straight away?
Sorry for my ignorance 😳
