Forum Replies Created
-
Posts
-
Re: indesit wixxe127 – F05
Hi we have had a dig around, cannot find anything, but as you turn the spindle around it feels like its sprung loaded? ie there is a build up of resisitance for 3/4 of a turn and then it goes loose, and that happens on very rotation in both directions – any ideas…
Re: indesit wixxe127 – F05
Thanks martin, can I ask do you know what sort of price that would be fitted? Would it be better/moreeffective fro a new machine?= rather than a repair?
Re: indesit wixxe127 – F05
hi martin,
before your last reply it did a quick 30 minute cycle successfully (empty load) so put a load on for a 112 minute cycle and f05 near the end again, so have emptied machine and checked pump again whilst running a spin cycle and it would seem that this time the pump was stuck only when i touched the fins did it start spinning – any ideas?? Last time when we did above the pump was running – so do you think we could need a new pump 🙁
Re: indesit wixxe127 – F05
hi martin, we have checked th washing machine (grey) outlet pipe all clear, our washing machine is located in the utility room so we have one ubend pipe then straight outside and all is clear.
Re: Brand new washing mac not starting help! Indesit WIXXE12
hi there, its not a silly question, I think you are right as its now displaying error H20, which means no water, sorry to have made such an elemnetary mistake, 😳 and thank you for taking the time to post! 😆
Re: Aquarius WT540 and flashing lights problem
What a bummer………….. 🙁
typical ! got the model where you can’t get individual bits.. :rolls:
thanks for that Helo
now, wheres that credit card…..
DarranRe: Aquarius WT540 and flashing lights problem
hmmm, cant seem to find this pump filter part, any1 have a link ?
Darran
Re: Aquarius WT540 and flashing lights problem
Okay – found the blockage its at the end of the black pipe and into the pump housing – a lovely selection of coins – 3 £1 – 5 2p’s 4 pennies and 3 10p pieces combined with a golf ball size of fluff/material – half of which was wrapped and the bit that unscrews from the front of the m/c
i will need to source a new part as it was in tight and the thread was difficault to unscrew it broke.
cheers for the help
Darran
Re: Aquarius WT540 and flashing lights problem
oooo ruddy hell – you know the variant from that rough description
8) 8) 8) 8) 8) 8) 8) 😆w/m safefy inside house next to dish washer and thats okay and we didn’t get that cold over here in Norfolk -8 ( one night only ) last week.
will get the tools out tomorrow morning
Darran
Re: Aquarius WT540 and flashing lights problem
Thanks for the info, i will try that, i have had a blockage in the pump ❓
thing at the front/bottom r/h/side.
let you know how i get on
Darran
Re: hotpoint wt540 -changing element but now banging against
Thanks – we have it all fixed and it has just completed its first load – thanks to you all SO much for your time and patience, this weekend this forum has helped me repair 2 appliances – THANK YOU!!!!
BP
Re: hotpoint wt540 -changing element but now banging against
hi
found teh old bracket, and have removed it, unfortunatley I took off the bracket off teh new one and can’t remember which way round it goes, wehn inserting the heater element should the bracket be ABOVE the element of below the element?
Thanks
Re: hotpoint wt540 -changing element but now banging against
hi Phidom,
The new one had a tin bracket on it, but the old one didn’t so he took off the bracket on the new one – do you think the old one is stuck in the machine – is this possible?
Re: hotpoint wt540 – help just keeps washing!!
hi penguin,
the element has arrived – do I have to remove the whole of the back which includes a large metal strip across the centre of the back and does that mean that the water pipe has to come off and do I need to removethe screws that hold the top?
Sorry 😳
