[busted100]

Re: F&P 703 the misses is killing me

Thanks Penguin45, proportion valve is in and all is fine. Washing as per new, again thanks for the help. 😀 😀

[busted100]

Re: F&P 703 the misses is killing me

thanks for the quick reply, I had been caught up with work etc and finaly had a chance to pull out the valve (just lazy and the misses does the washing). Will try and source part tommorrow(Monday), seems a common problem with these machines the more I read the site so hopefully they part is in stock.

Thanks again, will let you know how I go

[busted100]

Re: F&P 703 the misses is killing me

would there be a problem using part no. 426142 (inlet proportional valve – hot water) instead of 426143 (cold) is there really a difference between the parts?

Thanking you inadvance

[busted100]

Re: F&P 703 the misses is killing me

yeh up to that stage now and it is taking for ever to go through the rinse. Will try and get inlet proportional valve, hopefully this solves the problem.

May have to top up the rinse cycle by bucket

[busted100]

Re: F&P 703 the misses is killing me

so if I was to hook the coldwater to the hot water inlet and set the temp to hot it should run and fill etc faster? (until I get the new valve anyway)

thanks, I try that and see how we go

[busted100]

Re: F&P 703 the misses is killing me

tried the above and same results

Problem, the machine would be very slow to fill if just on cold water (a very slow trickle almost drips) but once washing it was fine until the other day it would get to rinse stop and start to beep with the hot and cold water temp buttons flashed

[Author]

Posts