[chasb441]

Re: Bosch 1400 No Spin or rinse selection available

OK…I will get those done tomorrow and let you and the forum know

charlie

[chasb441]

Re: Bosch 1400 No Spin or rinse selection available

Excellent advice….heater check is just a resistance test looking for an open circuit I guess?

regards
charlieB

[chasb441]

Re: Bosch 1400 No Spin or rinse selection available

Just had a reply from justanswer.co.uk “Hi Charlie, unfortunately the brushes are fine. Or were fine.
That would never cause this problem.
Not sure who told you that?
The problem is in the main control board.
To fix this you would need to replace the main control board (not cheap) unfortunately. Just so you know I have been an appliance tech for over 30 years.
But the best place to get that for price and reliability would be Espares, I have included for your convenience their contact information below. It is really easy to replace and if you choose to order the board, I will be here to help you at no additional cost.
I will stick with you until this is fixed and working as it should.
PLEASE RATE KINDLY AT THIS TIME, your question will NOT close or TIME OUT 😉
No additional cost to you to rate.
Thank you Charlie and have a great day!
Tech Michael” so what do you guys think?

[chasb441]

Re: Bosch 1400 No Spin or rinse selection available

Quick drain ok….when done the spin light flashes. Turn control to off door opens fine. Im going to do a cycle on the Spin setting to see what happens….will update later. I have not tried that cycle since replacing the brushes, only tried the control set to spin to see what lights up

[chasb441]

Re: Bosch 1400 No Spin or rinse selection available

Quick drain?….will try that next…thanks for the response

[Author]

Posts