cheesesarnie

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • in reply to: CDA CI960 washer/dryer #237954
    cheesesarnie
    Participant

    Re: CDA CI960 washer/dryer

    many thanks…had the machine out a bit today…no foam or transit bolts..

    on to plan c i think…no doubt wouldn’t have this problem if concrete floor

    in reply to: fridge/freezer buying advice #238254
    cheesesarnie
    Participant

    Re: fridge/freezer buying advice

    cheers don…whats looking best on the 60cm deep front..it might just fit

    p.s. does 60cm include the gubbins at the back of the machine?

    cheers

    in reply to: CDA CI960 washer/dryer #237952
    cheesesarnie
    Participant

    Re: CDA CI960 washer/dryer

    thanks…..washer was installed by kitchen fitters as part of a kitchen overhall…

    had a look at the feet & all looks ok there….will keep investigating..

    I’m assuming that if a transit bolt had been left in there would be a bigger problem when spinning up than my vibration issues (although I could be wrong…)

    cheers

    in reply to: CDA CI960 washer/dryer #237950
    cheesesarnie
    Participant

    Re: CDA CI960 washer/dryer

    this might sound sad but I’m sat with the instruction manual infront of me now (reporting a leak) and wash load is 6kg…

    currently looking at adding some support underneath the joists under the washer to see if that improves things..

    thanks

Viewing 4 posts - 1 through 4 (of 4 total)