[Clothesneedwash]

Re: Fisher & Paykel SmartDrive 058, fills slow then erro

Sounds identical as mine.

I used almost the same workaround. Wash on Hot because this valve was ok then when it beeps and stops at the cold rinse cycle i powered off started the wash cycle again on hot. Onceit filled i would forward to the rinse cycle and it carried on.

Change the valve yourself – it really is a piece of cake!

Cheers

[Clothesneedwash]

Re: Fisher & Paykel SmartDrive 058, fills slow then erro

Good news is the new cold water valve fixed the machine. The valve however doesn’t come with a new seal so I had to extract mine from the old valve. It doesn’t appear to leak but the next time I’m driving past a repair shop I’ll pop in and purchase replacement seals for all the interconnections that I needed to open.

Valve to plenum, plenum to controller thingo, controller thingo to tub.

Valve AUD$30 exGST and Shipping – Try Stareast.

Thanks Gents.

[Clothesneedwash]

Re: Fisher & Paykel SmartDrive 058, fills slow then erro

Hi ThirdMonkey

I too am in OZ and there must be something in the water! I have the exact same model washer as you and am suffering the same. The water fills slowly and the hot and cold lights blink and it beeps. Very annoying…

Have you had any luck changing the Valves?

Stupid Question. How is the lid sensed with the quick look i had i didn’t see a switch does it work of a magnet in the lid or an optical switch? I had to sneak a peak under the lid….

Cheers.

[Author]

Posts