[Colossus]

Re: AEG F60870M not rinsing properly, any ideas?

CJ

Thanks for your response, which is helpful. I have checked the filters and all were in place but did also check the arm rotation as suggested by DAve and it wasn’t turning as it should. I think there is an issue with it not connecting properly to the back of the machine where the water feed is, the seal does not appear to be particularly tight but with a good shove it seemed to connect enough to start moving the arm. I will see how we get on with this but your comments on the 3in1 powders are interesting. Is your view that they are not as effective as general powder and rinse aid> Cheers. Carl

[Colossus]

Re: AEG F60870M not rinsing properly, any ideas?

Dave

Thanks for your advice. The machine is only 5 months old and hopefully shouldn’t be worn and before I go to the hassle of getting someone to look at it under warranty (assuming they find a problem) I thought I would ask for advice. I will check for arm rotation this evening and see how we go. Many thanks for your input.

Carl

[Author]

Posts