Forum Replies Created
-
Posts
-
Re: Whirlpool AWM759-1 washing machine, no spin
Hi
My whirlpool started doing the same thing then after a few weeks the service light wold come on. In the manual there is the fix below:
Turn the machine off on the front panel and at the wall. Then turn it back on again and turn the programme control to drain/spin. Press start within fifteen seconds and see if the machine does a proper speed spin.
Worked for me… its like the control board had crashed. Could be lucky it isn’t a failed part and it will work.
Otherwise check the machine is level.
Seem to have fixed it. Downloaded the manual duh!
Read about service light and it basically tells you to turn the machine off on the front panel and at the wall. Turn it back on again and turn the programme control to drain/spin. Press start within fifteen seconds and the machine did a proper speed spin.
I’ve now done a 95 degree wash and all seems ok. Suppose it doesn’t rule out the problem reoccurring but it is working now. Perhaps the board had crashed like a Sky box can.
