[Corinthcom]

Re: Hoover HDC7FME error on display E then b (Eb)

I’ve disconnected the selector from the main PCB and the error still persists.

I’ve removed the selector control PCB and measured the resistor array on it an it seems to provide valid readings 40K ohms down to around 800 ohms.

Is this looking like I might have a faulty PCB again?

Steve

[Corinthcom]

Re: Hoover HDC7FME error on display E then b (Eb)

Thank you very much, I’ll check the wires and swap the selector.

[Author]

Posts