[craggles77]

Re: Bosch Chatter noise Please help

Martin wrote:WD40 often cures all though a little light grease on the bolts wont harm. Also check carefully that the welds on the cabinet base are not cracked.

You are one top guy martin,the chatter has stopped after greasing the bottom bolts off!!

I’m chuffed to bits,,can’t thank you enough.!!

But it does seem it needs a new shock,as one side you can push really easy,,what I’ve don’t for now is put a cable tie around the shaft and which has tightened it and made it the same as the other one.

They are really expensive for my washer make,but have found after market ones for 1/3 the price.What are your views on aftermarket shock?

Thank you again! 😀

[craggles77]

Re: Bosch Chatter noise Please help

Thanks,I’ve taken the bottom bolts out and greased them up,I noticed one shocker was easier to press,i’m not sure how much tension any are supposed to have as both was easy so to speak.I was expecting gas filled things,just seems like a shaft in a plastic casing.

Anyway the tops of the shocks have a plastic bolt knocked through so not been able to remove them as wasn’t sure if they would go back in.

Put a wash on and ill report back later on.

Btw -all welds are ok from what I can see. 🙂

[craggles77]

Re: Bosch Chatter noise Please help

should I take them out and grease up top and bottom? If i bounce on the drum it doesn’t make this sound.I did spray the bolts with WD ,though I could of missed the tops slightly 🙂

Qucik edit not sure how the top drum bolt comes out,looks like plastic hmm

[Author]

Posts