Critical_Bill

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • in reply to: Iberna Fridge Freezer #111493
    Critical_Bill
    Participant

    Re: Iberna Fridge Freezer

    Ok, the freezer drawers are for the top and the middle, so its just the fronts and not the section that fits to the basket ( seems to be the only bit that’s ok), also I will need the plastic parts which act as hinges for these drawers. As for the fridge door shelves they are all broken so I need the top, middle and bottom shelves. Not too sure what is meant by full and half width but I’m guessing it’s one full width for the milk etc. and two half width for the upper shelves but in looking at whats left of the shelves the one for milk and the upper one seem to be the same width.
    Is width the depth of the shelf or the height? I take it they must all be the same dimension side to side to fit the slots.
    Sorry for being so confusing.

    Bill

    in reply to: Iberna Fridge Freezer #111490
    Critical_Bill
    Participant

    Re: Iberna Fridge Freezer

    Hi Dave,
    The number on the rating plate is 3900984 0040 0261, hope this helps.

    Cheers,
    Bill

Viewing 2 posts - 1 through 2 (of 2 total)