[cynic-al]

Re: Whirlpool AWO/D049 – F12/heater circuit issue

Man said drum bent…and he’s right. New WM time!

[cynic-al]

Re: Whirlpool AWO/D049 – F12/heater circuit issue

Well the other board gives the same errors.

Time to call a man…

[cynic-al]

Re: Whirlpool AWO/D049 – F12/heater circuit issue

Oddly it doesn’t go into test mode when you press reset 4 times on switching to drain.

So I tried a run and it then gives me a F21 error.

I’ve ordered another board…

[cynic-al]

Re: Whirlpool AWO/D049 – F12/heater circuit issue

Thanks.

The brushes looked great, easily 10mm of wear left in them, and zero ish resistance.

Might get a man in now!…or look at a replacement

[cynic-al]

Re: Whirlpool AWO/D049 – F12/heater circuit issue

Ta – infinite resistance measured.

Now for the motor brushes!

[cynic-al]

Re: Whirlpool AWO/D049 – F12/heater circuit issue

Thanks. All solder joins look great.

Re measuring the earth with my £12 maplin multimeter gives 100k ohm which was rising slowly but I got bored.

[Author]

Posts