[Daniel Andrew Gosden]

Hi Dave. Sorry about the delay in replying.
NTC’s seem to measure fine.
Picked up another dryer today. Branded as swan but is identical. This also seems to have the same problem. It Trips the thermostat every so often.

[Daniel Andrew Gosden]

Thanks for all the info. It is still in the pile of machines ready to be resurrected 🙂

[Daniel Andrew Gosden]

Thanks for the reply Dave, the diagram was spot on. The door interlock contacts were also welded together, so I could load the dryer whilst it’s running thanks for the help. 🙂
​​​​​​

[Daniel Andrew Gosden]

Not sure if this is any help but it’s two photos I actually have on my phone. In the meantime I’ll get the others. For some reason I can’t upload pictures on here so I’ve attached a photo link to them. https://linksharing.samsungcloud.com/nGUx6uMXl8Sd

[Daniel Andrew Gosden]

Hi Dave. Thanks for the reply .
I’ll have to dig it out from the back of the dead appliance shed (it’s no mean feat, believe me)
​​
As soon as I know the info I’ll get back to you.

[Author]

Posts