[dave83]

Re: Hotpoint FSW20 not draining after wash.

iadom wrote:It really is time for the test equipment, first on the pump itself and then the wiring.

Hello

Quick update, striped the pump out again and put 240v on to it and it ran no problems but after turning off and on again the pump stalled. After opening it up further i found the o rings on the inside had been passing and behind it was all gunged up. So cleaned and replaced o rings rebuilt and job done. Thanks for your help.

David

[dave83]

Re: Hotpoint FSW20 not draining after wash.

Hello

Thanks for the reply. Yes it fails to drain and yes the main circulation pump is running. No i dont hear it running at the start of each cycle. I left it over night and tried it again without a wash tablet but it still fails to drain. The 1st and 2nd lights flash together and when you open the door there is a inch of water sitting in the base.

Thanks David

[dave83]

Re: Hotpoint FDW20 not draining after wash.

iadom wrote:Can you double check that model number please.

Hello

Oh sorry the model number was wrong it is a FDW20. I have edited the post title.

Thanks David

[dave83]

Re: Fagor FUS3611IT washing machine, Help.

Steviesparx many thanks for your help, you where spot on m8. Replace the resistor and it worked a treat.
Many Thanks Again

Dave83

[dave83]

Re: Fagor FUS3611IT washing machine, Help.

Anyone ?

[Author]

Posts