Forum Replies Created
-
Posts
-
Re: Hoover WS130 fails to drain
Well I ran two complete washes through and it appears to be ok after un-kinking the pipe.
Funilly enough it’s now squirting water through the seal – something I don’t ever remember it doing before. 🙂
Can’t try any more because I’m away until next weekend but I’ll report back if it plays up again.
Re: Hoover WS130 fails to drain
Thanks for the info guys.
Yes, I isolated it. I’m a qualified electrical engineer so well aware how you can get bitten 🙂
I think I might have cracked it.
From the recirc pump at the front, there’s a hose that goes upwards towards the drum. This used to be held to the side of the machine with a clip on a self adhesive sticky pad. The sticky had come away and the hose was very badly kinked.
Would this stop it emptying, because the machine thought there was a blockage?
I untwisted it and stuck it back and it seems to have done a complete wash and spin now but it was intermittent so I’m keeping my fingers crossed.
