[daveg73]

Re: Bosch WFLI2440GB overfilling

RickT wrote:Assuming that the water level is rising during this period of intermittent filling and not syphoning away, I would suspect pcb!

I knew someone was going to say that 🙁
Thanks Rick, I’ll tell the customer the good news.

[daveg73]

nomadPaul wrote:I take it that you’ve checked the sump hose and pressure chamber underneath the tub for foreign objects and blockages ?

Did a rudimentary check, seemed OK, I assumed that manually operating the pressure switch would eliminate that possibility.
Is there any sort of timed fill after the pressure switch has activated or other sensor connected with water inlet?

[daveg73]

Re: Bosch WFLI2440GB overfilling

Yep, done that,clicks immediately. if you blow and hold when machine is filling it stops filling and than starts again after about 5 seconds, release pressure and pressure switch clicks, so no pressure loss there.
I take it the switch is single level?

[Author]

Posts