[davetack]

Re: Neff oven fan not working after bulb blew

HI Clive

Thanks for the info, i managed to get a circuit diagram and traced the fault to a relay K2 on the main controller (i am a electrical engineer but not in the trade), after diagnosing the fault i was just about to order the part and i though i would see if i could get the relay only so i took the board out to get the details off the relay. When i did this i noticed the track on the underside of the relay had burnt out, i replaced the track and reassembled tested and everythingis fine.

🙂

[Author]

Posts