[davethebassuk]

Re: Whirlpool ADG332 Error Code – POWER LED 6 flashes

Thanks guys

Think the hose must have been kinked. Works fine now.

Cheers
Dave

[davethebassuk]

Re: Controller boards for Whirlpool ADG332

Dave

Re: Whirlpool ADG332 (rating plate no: 8542 332 15510)

I have now fitted the Main control PCB – 481221478477 which you kindly supplied. This has improved the situation:

Programme selector LEDs now illuminate when the programme selector is turned from OFF to one of the three programme modes. When the POWER pushbutton is pressed, the programme initiates (POWER LED illuminates and drain pump runs for ~20 secs) then the POWER LED flashes an error code(?) 6 flashes repeated.

Can you offer any further advice?

Thanks again
Dave

[davethebassuk]

Re: Controller boards for Whirlpool ADG332

Thanks Dave

The number on the rating plate on the door is: 8542 332 15510.

The machine doesn’t appear to respond to any control inputs at all. No lights/LEDs illuminate when the programme selector is turned from OFF to one of the three programme modes or when the POWER pushbutton is pressed.

Did get a local engineer to look at it and he too suspected one of the PCBs but wasn’t sure which. I think you’re right, that it’s more likely to be the main control board at the bottom.

Can’t see any other lights/LEDs providing error codes.

Have checked power from mains/fuses etc. Power appears to be getting to the main control PCB via the “user” board when the programme selector knob is rotated, but nothing happens.

Cheers
Dave

[Author]

Posts