[davidstaffs]

Re: AEG hob spares needed!

Phew! Megabucks for the halogen!

There are two elements inside the hob and one is not working but the other is still OK.

Is it not possible to replace the individual elements or is it the case of having to have the whole unit??? Sounds like same case scenario with some car manufacters who force motorists into having to replace a whole component which incorporates the tiny part that has packed up!!

“Spark plug Sir? Sorry – you need a new engine block………..”

Thanks for you ongoing advice and look forward to your reply

The other David!

[davidstaffs]

Re: AEG hob spares needed!

Hi again

Good news – I dug up the original handbook with relevant serial numbers etc.

Its an AEG glass ceramic built in hob model 615K.
ENR 611 524 986
6.3kw
type G mE 0004

F. Nr 07 01

The halogen hoblamp that needs replacing is for the large 180mm halogen cooking zone (1800 watts) The smaller halogen hob is OK (145mm -1200W)

The other replacement part needed is the control knob for the double circuit zone on the normal (non-halogen) hob. This switches the outer heating ring on the 120/210 mm dia. zone 750/2100 W

Any idea of best place to obtain these spares? Also price guide (yeah – guess they’re not cheap)
Thanks for your help so far!
David

[davidstaffs]

Re: AEG hob spares needed!

Thx – yes the oven is underneath so will need to be pulled out to check the ENR. I’ll post back as and when this can be done by self or with outside help

[Author]

Posts