[Davo40]

comet

Tell me more!!!!!

[Davo40]

Re: Hotpoint WF100P belt off…how to replace?

Hi m8,you have to put the belt round the motor pulley first,then put the belt as far round the drum pulley as you can,then cable tie the belt to the top of the drum pulley and spin the drum by hand,thats bout the only way to do it!!!.

[Davo40]

Re: Hotpoint VTD20G dryer – scraping noise

Hi,im a ex hotpoint engineer,when that model came out i was going to maybe 3 or 4 calls for the same fault every week.Its caused by the drum hitting the rear panel,hotpoint brought about 4 different mods to cure the problem,sometimes worked sometimes not,they eventually made a new drum to fit that has a different rear profile,this is the only thing that will cure it!!!

[Davo40]

Re: Hotpoint Aquarius DWF 35 not filling with water

Hi,try checking the drain pump impeller is not obsructed,if the machine cant do its 2 flushes,then it wont fill. Take the pump off and spin the impeller,even a chip off a plate or cup can block these pumps!!!

[Author]

Posts