dcroome

Forum Replies Created

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • in reply to: Zanussi m/o top hinge with pin part number? #410703
    dcroome
    Participant

    Re: Zanussi m/o top hinge with pin part number?

    Yes more then likely have already advised them on that ,thanks for your help anyway Martin .


    Sent from my iPad using Tapatalk

    in reply to: Zanussi m/o top hinge with pin part number? #410701
    dcroome
    Participant

    Re: Zanussi m/o top hinge with pin part number?

    Found it only comes with new door glass. Going to have one happy customer NOT .
    Only18 mths old and I sold it . Typical


    Sent from my iPad using Tapatalk

    in reply to: Zanussi m/o top hinge with pin part number? #410700
    dcroome
    Participant

    Re: Zanussi m/o top hinge with pin part number?

    in reply to: Zanussi m/o top hinge with pin part number? #410699
    dcroome
    Participant

    Re: Zanussi m/o top hinge with pin part number?

    Still nothing that matches top hinge (bottom hinge listed everywhere )lol
    I will try and up load a picture later if that helps .
    Thanks for your assistance Martin

    in reply to: Zanussi m/o top hinge with pin part number? #410697
    dcroome
    Participant

    Re: Zanussi m/o top hinge with pin part number?

    Afraid not Martin that’s the hinge for the top oven unless connect are showing wrong picture .
    It’s a free standing cooker so uses 2 pivot type hinges for the main oven . Doesn’t appear to be listed on the diagrams .


    Sent from my iPad using Tapatalk

    in reply to: Belling 611GR Grill Element #393436
    dcroome
    Participant

    Re: Belling 611GR Grill Element

    Check elementman.co.uk
    Just looked grill element does come up not sure if right one thou

    in reply to: Smeg A2 Range cooker #376376
    dcroome
    Participant

    Smeg A2 Range cooker

    My mistake must be thinking of different model lol. Either way would work thou I should think

    in reply to: Smeg A2 Range cooker #376373
    dcroome
    Participant

    Smeg A2 Range cooker

    Straight forward . Just need to remove facia panel to get access to side panel screws. Bout 4 screws front and back then side panel should come off easy with bit of a twist . No need to touch top at all .

    in reply to: Bosch Classixx problem #373200
    dcroome
    Participant

    Bosch Classixx problem

    Well worth repairing , just going to be scaled up or blocked up with fats etc in sump/ fill chamber. Call local tech should be able to fix for just there labour rate.

    in reply to: Hoover HFA29K fridge too cold #373137
    dcroome
    Participant

    Hoover HFA29K fridge too cold

    The fridge sensor is foamed in so would be pig of job to cut out insulation . Common for sensor to come away from back wall therefore freezing in fridge.
    In my opinion better of selling new 1 rather than wasting anymore time on this 1

    in reply to: Hotpoint dishwasher fdw60g #372561
    dcroome
    Participant

    Hotpoint dishwasher fdw60g

    Yes will be board have had a few times lately . I believe you will need to check serial number before ordering as I think there are 2 different pcbs for this range .

Viewing 11 posts - 1 through 11 (of 11 total)