Forum Replies Created
-
AuthorPosts
-
Death by donut
ParticipantRe: Hygena AHY801/2
ok will do
Death by donut
ParticipantRe: Hygena AHY801/2
Hi Penguin ,
had a bot of trouble buying it , what is the Verified by Visa bit?Navigated back from it and it all went pear shaped.
Could you find out if I bought it or not?
Ta
DbD 🙁
Death by donut
ParticipantRe: Hygena AHY801/2
Cheers for that Penguin , you were spot on , I’ve glued it up for now but will order the part later on.
Ta
DbD 😀
Death by donut
ParticipantRe: Blocked dishwasher
yes I did , however all searches I’ve done come up with a white handle.
DbD
Death by donut
ParticipantRe: Blocked dishwasher
Can anyone get hold of a handle for my hygena AHY8101/2 in BLACK?
Cheers
DbD
Death by donut
ParticipantRe: Blocked dishwasher
Also any tips on how to remove the facia on front of the machine door ( the wood effect door size panel ).
DbD
Death by donut
ParticipantRe: Hygena integral dishwasher
Cheers Penguin
DbD 🙂
Death by donut
ParticipantRe: Hygena integral dishwasher
Oops , found the link at the bottom :0)
Ok then instead of the first Q .
Where will the model number be on the dishwasher ?
DbD 🙂
Death by donut
ParticipantRe: Dryer recommendation
Ah , thats handy then , went and bought a hotpoint before the reply this morning. It had a 5 year parts on it which seemed pretty reasonable to me don’t know if I’ll be able to get parts only htough and ditch the labour .
Still for £159 , I ain’t too bothered.
Thanx for the reply and Rec’.
DbD 😥
Death by donut
ParticipantRe: Recommends for a new machine
The reply from Bosch:
I think the last bit is a double paste but here it is anyway.
Turn programme dial 1 click right (30 cottons)
Wait for 1200 (1400 on WAE 28162) rpm LED to light
Press and hold down spin button – 1000 (1200 on WAE 28162) rpm lights
Turn prog dial another click right then release spin button
Turn prog dial another click right – spin LEDs light
Press spin button a number of times until all spin lights go out – that
turns button signals off
Turn prog dial another click right – spin LEDs light
Press spin button a number of times until all spin lights go out – that
turns information signals offDbD
Death by donut
ParticipantRe: Recommends for a new machine
:sadder:
Ho hum.
Thanx anyways G
DbD
Death by donut
ParticipantRe: Recommends for a new machine
gegsy wrote:Hi DBD
There are two models mentioned in this post. Can you confirm full model number please.
Thanks
Greg
Hi Greg,
Been a bit busy , the machine is a Bosch WAE24162 , funnily enough I think it is ok now. Trouble is the Mrs does the washing so I don’t get to see it much 😀I’ll check it again this weekend.
Cheers for help
DbD
Don’t forget to pm me if anyone wants a bit of advice on tiling.
Death by donut
ParticipantRe: Recommends for a new machine
Hi all,
me again 🙂I followed Gegsys instructions to turn off the beep on my new machine but it doesn’t seem to do the trick.
No slur on your abilities of course Gegsy 😀
Any suggestions?
DbD 🙂
Death by donut
ParticipantRe: Recommends for a new machine
Thanx guys
DbD 😀
Death by donut
ParticipantRe: Recommends for a new machine
Trilobite wrote:Be sure to send off the Guarantee Registration Card, or else the second year might not be applied to your machine!
There is a phone number on the front of the machine that says to phone to ‘activate’ your 2 yr G’tee.
Tried yesterday , system down – classic call centre – phone back tuesday.One final Q’ gang.
Do you have any tips for keeping the machine in good order over its lifetime?
DbD
-
AuthorPosts
