[denshidan]

Re: schriber built in – hinges not closing door

The only point of possible contact is the tabs on the hinge I mentioned. The hinges screwed into the existing holes with no problems.

[denshidan]

Re: schriber built in – hinges not closing door

they were the hinges advertised here to fit my make of fridge but the difference is that the ‘bent up’ bit at the edge of the hinge is the width of the hinge in the old one but it comes down(up) – towards the middle of the fridge on the new ones and Im not sure its not this that is touching the seal and stopping the door close without having to push it shut. There is a slight indended line in the metal – am I supposed to cut this off?

[Author]

Posts