[Dinie]

Re: Hotpoint WD420 problems…

Thanks for the response. It was indeed lights 1 and 2. I had earlier tried switching the machine off and on again to no avail. However, I turned the machine off to 10 minutes, left it, and switched it on again and the lights cleared and I was able to start the next wash.

😀

Thanks again for the help;

[Dinie]

Re: Hotpoint WD420 problems…

I have a similar problem, but with less lights. 🙁 The power light is flashing rapidly and the “Drying High Heat” and “Reduces Creases” lights are also flashing. We’ve recently replaced the thermostat (about 2.5 weeks ago now) as the dryer was failing to dry. This solved the problem and the machine has been working fine until last night. First of all, the door refused to “unlock” after finishing a wash. I ran the wash again and the door opened. This morning, I’ve run another wash and now the above mentioned lights are flashing. Do I too have an NTC problem or has something just come loose after the thermostat replacement?

Thanks for reading.
Di.

[Author]

Posts