[dippy61]

Re: aeg 40650 (favorit)

thx for reply,
heating element- yep, happy to replace if required (i’m hoping this is the most obvious fault.
dry joints on comp board-could you elaborate, sounds cheaper so should investigate further, ie access, what to check for etc.
thanks in advance. dippy61

[dippy61]

Re: aeg l16810 issue

doh,
when replacing the pump, the door lock sensor came adrift, took the engineer 10 seconds to fix, £61 call out nice doing business with u guv.
Anyway all sorted and I think the 3 x pumps in 3 years is 1/ washer/dryer and 2/ aeg washer but zanussi parts (could have saved £300 and just got a zanussi).
Many thx for replies and full marks for the site.
dippy

[dippy61]

Re: aeg l16810 issue

I think your right, bit the bullet and called out an engineer for friday.
thx for the replies tho

[dippy61]

Re: aeg l16810 issue

sorry, also it does not flash any error sequence, just keeps clicking and start button flashes red/green.

[dippy61]

Re: aeg l16810 issue

the water wasn’t pumping away, but would empty when the hose was emptied into a bucket. The machine is only 3 years old and is now on 3rd pump.
After changing pump I selected a wash program but before I even select the start button it keeps clicking and the program will not commence, do you think this is connected or is another issue.

[Author]

Posts