[donut]

Re: bosch sgv43a03gb17

No Luck,

Float all working.
Float switch working.
Draining away nicely.
Getting stuck in cycle.
I’m now assuming it’s the control module.

Any thoughts please…

[donut]

Re: bosch sgv43a03gb17

Thanks,
I’ll give that a go.

[donut]

Re: bosch sgv43a03gb17

Thanks,
Side chamber with float has some gunge in it.
How do I clean it as it seems open at the top
but the opening is narrow to stop the float popping out?

[donut]

Re: bosch sgv43a03gb17

Right,
Now been on for two hours.
Obviously going through the cycle as the machine is warm inside..
But, the machine is now flooded and water is dripping from machine.
Turned off water and the machine drained fine so not blocked.
Obviuosly the anti-flood thing didn’t kick in…
Help!!

[donut]

Re: bosch sgv43a03gb17

Put it all back together, seemed to start going through some
kind of cycle, been on for about 40 minutes now and seems to be stuck in the drain cycle again.
Noticed that the aquastop is running warm/hot.
Is this normal?

[donut]

Re: bosch sgv43a03gb17

OK,
Have checked the tray,
all seems ok with no water laying in it.
I’ve checked the float switch which operates
when lifted.
Any further help please??
Thanks again.

[donut]

Re: bosch sgv43a03gb17

Thanks…
How do i get access to the tray?

[Author]

Posts