[Doron]

Re: tiny spots of black enamel paint on ceramic hob come off

Thanks for the info Bryan!

[Doron]

Re: tiny spots of black enamel paint on ceramic hob come off

Hi Bryan

Thank you for getting back to me!

I did have some burnt spots on the hob and managed to remove this with a hob cleaner.

But the other ‘markings’ are what you probably said and are pittings. Tiny bits of ‘black colouring’ from the hob surface have come off!

From now on I will clean the hob much more regularly.

Do you know if their is any product out their that can restore these pitting marks?

Appreciate any advice!

Kind regards, Doron

[Doron]

Re: AEG Hob, two cooking zones not working…

Hi Kwatt

Thank you, I’ve just bridged the live terminals and now the other two cooking zones are working.

In the instructions theirs only a line diagram, no text to say what to do and when I originally looked at the line diagram I assumed to connect the live to any one of the two live terminals.

So thank you once again!!!

Kind regards, Doron

[Doron]

Re: AEG Hob, two cooking zones not working…

Hi Kwatt

Thanks for getting back to me!!

Looking at the line diagram for the L / N / E terminals on the hob, the live has two terminals, can I check please if I should bridge the two live terminals together.

Thanks for your help.

Regards, Doron

[Doron]

Re: AEG double oven smoke and noise

Hi Mike

Thank you very much for getting back to me.

When I first switched on the top and bottom oven their was a bit of smoke inside both ovens which like you say was probably the elements smoking from the coating, but the type of smoke I was describing was coming out from the air vent between the top oven and control panel, the smell it gave was an electrical burning smell.

Hope to hear from you soon when you have a moment.

Thanks again Mike

Doron

[Author]

Posts