Forum Replies Created
-
Posts
-
Re: Bosch Excell H24 Error Code
I also received an h24 code – not H24, but h24 – on my dishwasher – I know this is late for the thread opener but – to get around it initially, hold the start button for 3 seconds which will reset the washer and allow you to continue.
The only code in the manual that comes close is E24 which means the outlet hose is kinked – leaving a bit of water in the dishwasher. I know that close only counts in horse-shoes and hand-grenades but there was water in the bottom of my dishwasher. I re-read the entire manual and believe h24 means 24hour delay – which can be accidentally triggered via hitting the “-” button once – or the “+” button 24 times. So the 2 ways to reset it are to hit + or – until it says h00 or the reset mentioned above.
Funny thing about the Bosch diswasher is that it doesnt say any where (obvious) model#=xxxxxxxx. There are many numbers on the manual and washer itself but no clue as to which one is the model# until you bring out the CSI forensic equipment and find it using UV rays on the inside leftish top of the front door. Model#=SHX58E15UC/01. By the way, that scheme gives 3,089,157,760,000 possible models – before the /01. Really? Is that necessary? As for the code – Couldn’t they have simply had a display or light that signals delay is on?
