[dsr]

Re: Hoover 1300 model HF 7130M – Programmer not responding

Timer replaced and working……but……….!

The machine only pulls in around 6 litres of water during the wash cycle (excluding rinsing). Some of the washing is almost dry on the inside. Changed the pressure switch and its still the same.

The manual suggests 45 litres total usage for the setting we use; however, when we measured it, it came to 6 litres for the wash followed by three rinse’s at 9 litres each: a total of 33 litre’s.

Hmmm time to throw the thing in the skip and buy a new one me thinks….

[dsr]

Re: Hoover 1300 model HF 7130M – Programmer not responding

Martin wrote:

dsr wrote:
Does this sound like a module or timer fault ?

Timer, you need one ofTHESE 😀

Cheers, would that also be responsible for the following when starting a full wash program : The cold valve lets in water for a few seconds followed by the hot valve for another few seconds – combining a total of around 1 litre of water !

[dsr]

Re: Hoover Family 1300 model HF 7130M UK – Stink issue !

Thanks all for the concise advise.

90 degree wash’s are taking place this weekend followed by a change to bio-powder 🙂

I’ll let you know the outcome. Cheers guys.

[dsr]

Re: Hoover Family 1300 model HF 7130M UK – Stink issue !

iadom wrote:What type of detergents do you use, liquid or powder/tablets, what temperatures do you wash at, are you in a soft water area?

Mainly liquid tablets, 40-50 degree wash. hard water area.

[Author]

Posts