Forum Replies Created
-
Posts
-
Re: warm final rinse??
I’ll try moving the outlet pipe down a little as it’s been a little smelly lately too so maybe as you say it’s unable to pump out all the water!! I’ll let you know once I’ve done another wash load! Thanks for your help so far!
Re: hotpoint wm72 1200 ultima
yay I’ve done it….bought the new heating element, bearing kit etc… oh and new seal….after a good few wacks got the bearings out (boy they were worn away) and hey presto put it all back together with no spares left over!!!
And it’s lovely and quiet with no Error 15’s anymore! FAB hopefully I won’t be needing the site for a while but thanks for all the advice and I’ll recomend it to all my friends/family!!
Thanks again!Re: hotpoint wm72 1200 ultima
hi, B4 I pop off all the clips around the drum do I have to remove these to get the front off.
I know yr limited to what you can tell me! But I’m determined to do this myself.Re: hotpoint wm72 1200 ultima
ok so I gather I just need to undo the clips around the drum ( I know you probably can’t answer that one)….Yep I’ve obviously removed the plug from the mains and all the water pipes so I could move the machine enough to work on it.
I’ll let you know how I get on once my 9mth old daughter goes back for a nap!
The machine was also noisy when on the spin cycle so is it worth replacing the bearings whilst I have it out or could this have been where the drum had dropped?
