[Dunlop]

Re: Whirlpool ADP5406 not performing wash cycle, please help

Hi K

Do you know how I gain access the heater, I think I will test to see if it has a supply.

Regards Dunlop

[Dunlop]

Re: Whirlpool ADP5406 not performing wash cycle, please help

No flashing lights the only lights on the machine are the 3,6 or 9 hours delay lights(red) the start light(green) the anti bacterial light(green) and the salt warning light not sure of colour, none of the lights are flashing.

Does the flow meter detect water flow in or does it have another function? regards Dunlop

[Dunlop]

Re: Whirlpool ADP5406 not performing wash cycle, please help

Hi Kwatt

I have no idea what the 12NC number is, but this is everything printed on the label, apart from the obvious ie voltage, power consumption etc, that has not rubbed off with cleaning.

ADP 5406, Type: WIC, Board service: 548631, Data: 548621

Service 8511 561 15830 38 0914 003082

and in another section the CE mark followed by VDE in a triangle the letter P and the number 8511 561 15830 I have taken photos if it helps.

Thanks again, Dunlop.

[Dunlop]

Re: Whirlpool ADP5406 not performing wash cycle, please help

Hello Kwatt

The model number is definitely correct “Whirlpool ADP 5406” I can only assume it is still quite a new model and I have been unlucky to have a relatively early fault.
The machine did fail to operate on a number of occasions before it failed completely, we just had to try a couple of times, and by that I mean it operated as I said and we just tried again and it worked, but now it wont.
Do you know if any service/maintenance instructions are available for this appliance?

I hope you can help, thanks.

[Author]

Posts