[eas4uk]

Re: Bosch Classix 1200 WAE24162 – door seal needs replacing?

In the middle of trying to change this seal and Ive got a bit stuck

How do I get the actual seal out? I have removed the control panel, soap tray as described, removed the first retaining ring and the door, and can now see a second retaining ring… How do I get to this to get the seal out, and then get the ring back on the new seal?

I’ve attached a photo of where I am at in case it helps….

Thx again in advance of any replies 🙂

[eas4uk]

Re: Bosch Classix 1200 WAE24162 – door seal needs replacing?

Thanks for the replies everyone – have ordered a genuine Bosch one and will have a bash at replacing it when it arrives 🙂

[eas4uk]

Re: Bosch WAE24162 – Fabric Softener & Annoying Bleep!

Paul

Thanks so much for that – it worked a treat
I used a cable tie and some bathroom cleaner, and then rinsed it all out by carefully ‘firing’ some hot water up there and then ran it on the 90deg wash as you recomnended…

It now works perfectly!

Thanks again – much appreciated

Just the beep to try and overcome!

eas4uk

[Author]

Posts