[eck01]

Re: Indesit IDL700 Not emptying

I had the same problem. I removed the top, the panel beneath the door and the right-hand side panel (as seen from in front). The pump is located at the bottom and can be easily removed after undoing one screw and the waste water pipe. You get at the screw from the front. After removing the pump there are three star-headed screws which allow the pump to be removed from the motor. I had what appeared to be a clove stuck in the pump. Once cleaned out, re-greased, and reassembled the machine worked fine again. Total cost £0 🙂

[Author]

Posts