[ECO1]

Re: Hotpoint FDW60 Lights 3 and 5 Flashing

Thanks Iadom,
I drained the hose and the switch, there was a fair amount of liquid in the pressure switch.
I then started a wash program, and am still seeing the same error codes after about 1 minute 🙁 . Do you have any other suggestions?

[ECO1]

Re: Hotpoint FDW60 Lights 3 and 5 Flashing

Thanks Iadom 🙂 ,
What does the pressure switch look like? Is it the circular brown and white plastic thing ~1.5 ” diameter attached to the bottom of the RHS of the machine with 3 terminals and a small rubber hose going into it?

If so how is best to dry it out, remove it and just blow into it? Should I then put it in a dry place to dry out the electrics?

I have removed the hose from this before, there is water in the hose should there be if the machine is not running?

ECO1

[ECO1]

Re: Hotpoint FDW60 Lights 3 and 5 Flashing

Thanks for your reply. What does this look like? Is there a way to test if this switch is faulty?

[Author]

Posts