ed123

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • ed123
    Participant

    Re: Replacement for Ariston Integrated FModel number: ON-ME

    Hi Don
    Thanks for the info. Looks the right type of replacement albeit an expensive one. I have some time so at first I will maybe remove it from the housing with a view to repair. I will give it a shake! Thanks for all your help and speedy advice.
    Ed

    ed123
    Participant

    Re: Replacement for Ariston Integrated FModel number: ON-ME

    Hi Don
    Thanks for geting back to me. Sorry it has taken a while for me to reply. The fridge (larder fridge, no icebox) is approx 34inches high (85cm) by 21 1/2 inches wide (53cm). As for it’s height off of the ground it is at waist height. (or a bit higher than waist height). It is approx 42 1/2 inches (107 cm) from the kitchen floor and approx 36 1/2 inches (93cm) from the bottom of the cupboard it is in. The fridge has a solid door and a solid kitchen door attached to it by a two metal bar slot system, one bar at the top and one bar at the bottom. (hope this describes it ok!)
    Thanks for all your help with this.
    Ed

Viewing 2 posts - 1 through 2 (of 2 total)