[effingpot]

electrofix wrote:when you press start you are actually pressing a very small switch on the board. they can get dirty and only work sometimes, they can have bad solder joints that cause the same

Dave

Thanks Dave, what would do with it?
Cheers
Mike

[effingpot]

electrofix wrote:there is a door switch so thats possible

Dave

Actually I played around a bit and without touching the door, turned the machine off and on, then gently pressed start a few times, then repeated until it started. So I think that may rule out any switch in the door latch 🙁 Bit stumped frankly!

[Author]

Posts