[entech]

Re: Diplomat ADP 8902 not progressing/finishing cycle

Hi all.

Problem still ongoing. Anyone have ideas. Really appreciate any help need it fixed.

Thank you.

[entech]

Re: Diplomat ADP 8902 not progressing/finishing cycle

Hi, I have exactly the same problem. Heater is working and I ran the door thermostat under some hot water and the resistance decreased to around 5ohms. Any more ides what problem can be? . Is the door thermostat just for cut out if it gets to hot or is this the only thermostat for checking water temp? It’s proving somewhat trouble to get this dish washer running correctly.

[entech]

Re: New here . Pls help.

BobHope wrote:before you go buying the thermistors please do check that the fridge door has not dropped and stopped activating the light switch, its often the case as this also stops the fan from running.

Bob.

Thanks for reply Bob. I have checked the upper door half and the light is extinguished when shut. When I have the yellow thermistor disc the fan runs , I also opened the upper door and the fan stopped.

[entech]

Re: New here . Pls help.

kwatt wrote:The resistive values of the thermistors should change as the temperature does, I’d check that first.

Board is the expensive and pretty uncommon option. 😉

K.

Thanks for reply. I checked out both thermistors with a meter and the resistance values rose with cooling.

[Author]

Posts