[fairwayfred]

Thanks. Got it all apart, relays look ok but K1 module is looking a bit charred. That looks to be ‘display of the adjustment module’ according to the translator – could this be the culprit?

[fairwayfred]

electrofix wrote:find and measure the resistance of the element would be my first job

just looked up the diagram and that’s a Bosch built unit

in that case my first port of call would be the timer. The relays on the board are prone to bad solder joints stopping it heating

Dave

Thanks for that, shall check the board first off. Do you have a copy of the diagram or a link to where you found it?

Cheers

[Author]

Posts