[Fed]

Hi Dave, I think that’s the sensor I already replaced. Anyhow, I refitted the felt ring around the drum at the rear which had torn apart and fallen off and that seems to have fixed it. I’m annoyed I didn’t do this before spending £100 on parts but we learn! At least it’s working now.

one small thing, when I detached the drum I found a small pin with a moveable T fastener and a spring on the floor. Any ideas where this could have come from?

Thanks for your help.
Cheers Grant

[Fed]

Thanks, I’ll take a look.

cheers
Grant

[Fed]

Ok thanks, will take a look. Have a good evening.

[Fed]

Thanks Dave. Is that a different sensor to the heater element sensor probe as I’ve already replaced that one?

[Fed]

It doesn’t heat on timed drying

Regards
Grant

[Fed]

I’ll try it when I get home, thanks

[Fed]

I have been testing it with wet towels in. Do you have any other thoughts?

Thanks
Grant

[Fed]

Sorry, missed the second part of your answer. I don’t think there’s a timed mode, only degrees of dryness on the rotary dial. Am I missing something?

cheers
Grant

[Fed]

Hi Dave,

it’s about 5 to ten seconds. I have put the covers back on and it seems to be the same, although of course I can’t check but it doesn’t heat the drum.

Thanks
Grant

[Author]

Posts