[Felix53]

Re: Zanussi ZDT12011FA Pump running continuously

Hello please help
Dish washer has sat unrepaired since first post – sorry for not progressing – family issues took priority
I now have time to persue
Have not tried the pressure sensor kit – but will do if the following recent test/experience still shows that it will be required
Have now run washer again – initially water was taken into the machine and it appeared to be working normally- (hot water splashing around)
Then – it stopped – end indicator flashing
Then – without intervention it restarted (wash light flahing) ran for a while, stopped and the end light and audible signal sounding 5 times pause 5 times continually
Tried tipping machine over to about 45 degrees – no water appeared

After 10 mins I restarted the machine
Now no water is being taken in to the machine and after running thro part of an Eco cycle it stopped with the end indicator /audible signal sounding twice intermitantley
Also tried on 70 deg wash – same result -ie no water 2 intermitant beeps/flashes of end indicator
I hope this means something to you
Your help would be gratefully appreciated

[Felix53]

Re: Zanussi ZDT12011FA Pump running continuously

Thanks
Time to get my hands dirty
I’ll be back

[Felix53]

Re: Zanussi ZDT12011FA Pump running continuously

Hi
Thanks for the reply
Alas
Integrated machine so have not tipped to the side
No water under machine – no sign of a leak
I poured a kettle full of water into the m/c and ( with the mains switch on the pump came back on ) it all pumped away easily

[Author]

Posts