[fitzmooney]

Re: Asea Cylinda 1500

Hi Dave,
I have managed to get part number for the motor/pump assembly from Asko. It is 8801027.
Also numbers on the machine are –
Type : DM-1500-0262
S/N : 00666
Hope these are of some help.
Cheers,
Mike

[fitzmooney]

Re: Asea Cylinda 1500

Hi Bill,
The seal seems to be made up of two parts.
The spring assembly with a rubber seal at one end and a carbon seal at the other. Then there is a ceramic seat and seal in the pump housing.
The seal has leaked and rusted the shaft which in turn split the impeller.
Hope this is some help.
Cheers,
Mike

[fitzmooney]

Re: Asea Cylinda 1500

Hi Dave,
It probably is an Aussie model.
I don’t have a part # from Asko. I had the pump and motor assembly replaced about 5 years ago.
There is a label on the motor housing. looks like it was made in Italy by “IB-MEI S.A.” for Asko. There is a part # 9224335608 on the bottom righthand corner on the label.
I hope this is some help for you.
Cheers,
Mike

[Author]

Posts