[flashheart8]

Re: Creda main oven doesn’t reach temperature

Quick update for any similar problems.
The main oven fan was working but on closer examination, it stalled periodically and has now stopped completely (works with a helping hand from a screwdriver but not advised).
A little harder to change as it means taking the back off the oven to, new part only £14.
Thanks for the help guys.

[flashheart8]

Re: Creda main oven doesn’t reach temperature

SAMURI wrote:It may be the fan oven element faulty.

Set the oven on fan heating only and check to see if the stat cuts out and if any heat is produced.

If the light stays on and the stat does not cut out it will be the fan element.

Bob

Hi Bob,
Set to Fan heating only,no stat light comes on fan in the back doesn’t spin and no heat?
Also tested element and it’s 23 ohms.

Ian

[flashheart8]

Re: Creda main oven doesn’t reach temperature

Thanks Samuri,
I’ll try that now.

[flashheart8]

Re: Creda main oven doesn’t reach temperature

Hi Dave,
The stat is in place with nothing loose,all spade connectors behind the switch look fine.
I take it there is no way of checking the stat and the only way to be sure is to replace it?

[flashheart8]

Re: Creda main oven doesn’t reach temperature

Thanks Dave,
I was thinking it could only be the stat, i’ll have a look and post my findings.

[Author]

Posts