Forum Replies Created
-
Posts
-
Re: Creda Autoclean electric cooker circa 1967
Thank you very much for that info. I’ve already bought a couple of 41ER110B1 regulators and I see that happily that is the number on the side of the one you mention. The UKwhitegoods price is slightly less than I paid, however! I’ve pencilled in later today for fitting them
Re: Creda Autoclean electric cooker circa 1967
OK, so I managed to pull the cooker out today and the details are Creda
40011, 13,350 Watts, Specification 400110000LG, Serial 169/2839.Looking at the Regulators, they are sort of black and rectangular! On the
sides of all of them (except the simmerstat one) is printed 21 ERI-68.They seem to have 4 or 5 spade terminals in use. The one at the top is
hooked up in parallel with the same terminal on the others so I suspect
that may be the live feed for the telltale light.The overall spindle length from the base of the threaded part is 24mm and
out of that the length of the revolving spindle itself is 15mm.I didn’t pull them out to test them, but as the wiring looks ok and the
rings are ok they must be suspect. Can anyone suggest a successor
part, or a pattern replacment? Many thanks.Re: Creda Autoclean electric cooker circa 1967
Thanks very much for that quick response.
I looked around the top of the back for a pop-up tag – no such luck.
But I did find the previous owner’s saucepans in a glide out warming tray at the bottom. 😀
Not sure how to upload pics, but you can see the beast here:-
http://vads.ac.uk/diad/article.php?title=234&year=1968&article=d.234.35
The ring in question is 5.5″ across and works fine. Presumably there would just be two wires going to it so a simple generic regulator might do? There is only one tell-tale for all five knobs.
