[fused]

Re: F&P GW509 bowl full

Lid switch confirmed U/S.

Replaced and all is well.

Thanks for all your help,

Best regards,

[fused]

Re: F&P GW509 bowl full

Sorry for the confusion, I figured this was a different fault.

The machine is still cactus. I’ve done a visual on the circuit board and checked the oob micro sw with a meter, all ok. The machine powers up ok but no action when the start button pressed as already mentioned. I’ve set size again according to Kiwi’s advice, no changes.

Does this mean I need a new Main board? What sensors could prevent the machine from starting? Are there any control signals I could check with a basic meter to diagnose further?

Regards,

[fused]

Re: F&P GW509 bowl full

Thanks, size set ok.

The machine still does nothing once the start button is pressed. No noises of anything trying to start. Powers up ok, first progress indicator blinks as normal then goes solid once start pressed but no action.

Is this terminal?

[fused]

Re: Fisher Paykel GW509 Beeps on start up

Mate, beautiful….it’s filling up on a test run all seems to be ok at this early stage so thankyou very much. The ol’ phase 5 size error eh…?
It’s progressing nicely now, cheers…! If you were local I’d buy you a beer…

Regards,

Glen

[Author]

Posts