[gary996]

Re: Ignis ADL 348

Have changed the element and all is working as it should be>

[gary996]

Re: Ignis ADL 348

Ok have stripped it all out.
You have to lay it down and remove the bottom panel.
Have put a continuity test on the element and don’t get a reading at all. A 500v insulation test across the element gives a reading of >999 and just to be sure putting 230v across the element I have no current reading on a clamp meter.
I think this pretty much tells us the element is caput. Do you concur?

[gary996]

Re: Ignis ADL 348

Cheers mate. Will take a look a come back with what I find.
Only downside is its intergrated so have to dismantle the kitchen

[gary996]

Re: Ignis ADL 348

I have a Megger 1730 (electrician here)
Hoe do you get access to the element?

[gary996]

Re: Ignis ADL 348

Have got the fault code if this helps F3

[Author]

Posts