Forum Replies Created
-
Posts
-
Re: Fisher & Paykel error codes
Penguin45 wrote:Numerically, right to left, which lamps are lit? This is all in the diagnostics thread at the top of the forum if anyone ever bothered to read it.
Penguin45.
I read the sticky, but mine shows no lights at all on that diag test.
(hold and slow lights are on)
Is it possible for someone to put a screenshot of the machine, and explain how to read the codes as I thought it was read left to right but now read it is right to left in binary, and I cant workout how to “add” the numbers together.
Re: F & P gw709 stopped working after wash cycle
I also have a Fisher & Paykel GW709AU 7.5 kg Smartdrive9 excellence toploader.
It does the same thing. It has just started turning itself off (not just stopping, TOTALLY OFF, no lights, nothing) during any part of the rinse and spin cycle’s.
It does the entire wash OK but as soon as it goes on to the rinse or spin cycles something upsets it.
I’ve searched these forums and found similar issues but not the same. It pumps out OK, starts to spin but then apparently randomly turns off.
It needs to be unplugged and left for around 5 minutes and then you can turn it on again and give it another go.
I’ve checked the balance switch and it is OK.
It doesn’t give any warning beeps, flashings LED’S, nothing, just turns off.If anyone has any clues to help me out that would be great thanks.
