[gazzastuart]

Re: AEG Lavamat 76810 E70

I have checked these things now.
The wires from PCB to the NTC are fine, all wires are in the loom and clipped along the route, I get 5.1K across the NTC with the machine at room temp and not connected to the PCB. I think its either the pcb or the ntc failing…I only want to buy one of these items though, is it worth checking the pcb for dry joints?

[gazzastuart]

Re: AEG Lavamat 76810 E70

Thanks Dave.
So If I meter out the cables from NTC to PCB. Then Check Ohms across the NTC, any idea of the value I should be getting at room temp?
**If I check it in hot water, I should just see a change anyway.
This fault is still intermittent, sometimes it works fine

[Author]

Posts