[gcraick]

Re: Fisher & Paykel SmartDrive 058, fills slow then erro

thanks for your help on this.

Is the Rotor position sensor down the bottom of the tub?

or up near the top near the board and things?

[gcraick]

I believe I have error code

10000011

with 1 = LED’s on display.

It’s either that or 0110101 ..hmm

I have pulled out the main board, and put it back, cannot see any signs of obvious damage, burn-out.

[gcraick]

Re: Fisher & Paykel SmartDrive 058, fills slow then erro

thanks for the tip.. I will try and run the diagnostics, and see what it pulls up.

No, not much forum support down here for the machines 🙂

[gcraick]

Re: Fisher & Paykel SmartDrive 058, fills slow then erro

Interesting, mine is just having problems too.. I really think they’re a poor machine, going by the number of people with the same problem a few years on! I’d expect 20 years use without problems, much like the less fancy, but reliable non-electronic models.

Anyhow, mine seems to fill up ok.. but after that, it doesn’t seem to do the wash routine, or spin. The rotator will like ‘twitch’ and think about moving, but not actually do anything. Then it will go into ‘beeeeeeeeeeep’ mode. It will drain, fill.. but not wash. Any ideas? 😯

I had trouble with the lid-sensor too.. I just chopped the red and black together where it goes into the plug so it was ‘always closed’. That was a problem for ages too.

[Author]

Posts